When a manufactured home settles unevenly, the whole structure suffers. Sloping floors, doors that will not latch, and cracks that keep reopening are almost always signs that the piers and supports under your home have shifted. Releveling resets those supports so the home sits true again and the damage upstairs stops getting worse.
What's included
- Pier and support reset
- Doors and windows realigned
- Single and double-wides
- Precision laser leveling
Signs you may need this
- Floors that slope, dip or feel bouncy in places
- Doors and windows that stick or will not latch
- Gaps opening between walls and the ceiling
- Cracks in drywall, paneling or exterior siding
- Visible gaps or leaning piers under the home
Why mobile homes fall out of level
Manufactured homes rest on a grid of piers and footings rather than a continuous foundation. Over time the soil compacts, moisture moves the ground, and individual piers settle or lean. Even a small shift under one part of the home telegraphs upward into the floors, walls and ceilings.
Because the movement is gradual, most owners notice the symptoms long before they connect them to the supports below. That is why a cracked wall or a sticking door is so often a leveling problem in disguise.
How we relevel your home
We measure the entire home with precision leveling tools to map exactly where it has dropped, then adjust and reset the piers and supports to bring everything back into plane. Single-wide and double-wide homes are both handled, and we recheck doors and windows as we go so the fix shows up where you actually live.
- Full laser survey to find every low point
- Pier and support reset or replacement as needed
- Doors and windows realigned to close properly
- Final recheck across the whole home for a true, stable result
Related reading
How to Repair Holes and Cracks in Mobile Home WallsNeed mobile home releveling in Greater Sacramento?
We specialize in mobile and manufactured homes and diagnose the real cause before any work begins. Get a free, no-pressure estimate.
Related Mobile Home Releveling Reading
How to Repair Holes and Cracks in Mobile Home Walls
Patching a mobile home wall trips people up because it usually is not drywall. Here is how to match the repair to VOG panels, paneling, or batten seams.
Read guide
How to Repair a Mobile Home Ceiling
A stained or sagging ceiling panel is almost always a message from the roof. Here is how to tell if the leak is still active and repair it so it stays fixed.
Read guide
DIY vs. Professional Mobile Home Repair: What to Know
Some mobile home repairs are good weekend projects. Others cost more when a small mistake grows. Here is how to tell which side of the line a job falls on.
Read guide